[ROM]SGG DT Based on KQ3 [2.3.4]
+2
kaspar823
Chillax
6 posters
Page 1 of 1
[ROM]SGG DT Based on KQ3 [2.3.4]
Hello, guys!
I just wanted to share a Rom with you. I've been using it for 2 weeks now, but I went back to CM7.2. But this ROM runs smooth
Want to [You must be registered and logged in to see this link.]?
___Want to [You must be registered and logged in to see this link.]?___
SCROLL DOWN FOR THE KERNEL FIX.
Video review
BenchMark test without OC:
[You must be registered and logged in to see this link.]
Installation.
FOR MULTI FILE Firmware Package( example: APBOOT,CODE,MODEM,CSC)
NOTE: Always do a fectory reset before and after flashing to avoid glitches.
1. Extract and Run Samsung S5660 Galaxy Gio ODIN 4.42 Downloader on your Desktop.
2. Open ODIN and Click OPS button and select and load: Gio_v1.0.ops
If you want to flash single file(.tar) click on Single package and locate the single .tar file in single package option . skip to step 7
3. Click BOOT button and select and load: APBOOT_S5660xxxxx_CL940762_REV03_user_low_true.tar.md5
4. Click PDA button and select and load: CODE_S5660xxxxx_CL940762_REV03_user_low_true.tar.md5
5. Click PHONE button and select: MODEM_S5660xxxxx_CL928654_REV03.tar.md5
6. Click CSC button and select: GT-S5660-MULTI-CSC-Oxxxxx.tar.md5
7. Turn the Samsung Galaxy Gio into Download mode by pressing ( Volume Down + OK + Power ) together.
8. Connect Cable phone to pc Make sure that the program detect the phone.
9. Click Start button if all set and ready,and wait until the program will finished downloading files. A word PASS! will appear if the flashing successfully completes.
The phone will then reboot,you can check and confirm the newly downloaded firmware version by typing *#1234# and then do a full reset by typing this Code *2767*3855#
Special equipment for the ROM:
1. It's rooted.
2. Deodexed.
3. A2SD Darktremor
4. Ram script added
5. Custom bootanimation
6. Cool animations.
Not included
1. Google Maps. You can download it from Market.
2. YouTube app not included too. Download it from Market
Enjoy.
Guys.
Best regards,
AndroidNoOB
-----EDIT-----
For the kernel WIFI / 3G / 2G not working.
USE THE OTHER KERNEL.
I'm not responsable for the damage done to your phone!
-----FIX-----
Here's another KERNEL. From Phiexz.
Not tested by me.
SHOULD FIX THE WIFI / 3G / 2G PROBLEM
-----[You must be registered and logged in to see this link.]-----
I just wanted to share a Rom with you. I've been using it for 2 weeks now, but I went back to CM7.2. But this ROM runs smooth
Want to [You must be registered and logged in to see this link.]?
___Want to [You must be registered and logged in to see this link.]?___
SCROLL DOWN FOR THE KERNEL FIX.
Video review
BenchMark test without OC:
[You must be registered and logged in to see this link.]
Installation.
FOR MULTI FILE Firmware Package( example: APBOOT,CODE,MODEM,CSC)
NOTE: Always do a fectory reset before and after flashing to avoid glitches.
1. Extract and Run Samsung S5660 Galaxy Gio ODIN 4.42 Downloader on your Desktop.
2. Open ODIN and Click OPS button and select and load: Gio_v1.0.ops
If you want to flash single file(.tar) click on Single package and locate the single .tar file in single package option . skip to step 7
3. Click BOOT button and select and load: APBOOT_S5660xxxxx_CL940762_REV03_user_low_true.tar.md5
4. Click PDA button and select and load: CODE_S5660xxxxx_CL940762_REV03_user_low_true.tar.md5
5. Click PHONE button and select: MODEM_S5660xxxxx_CL928654_REV03.tar.md5
6. Click CSC button and select: GT-S5660-MULTI-CSC-Oxxxxx.tar.md5
7. Turn the Samsung Galaxy Gio into Download mode by pressing ( Volume Down + OK + Power ) together.
8. Connect Cable phone to pc Make sure that the program detect the phone.
9. Click Start button if all set and ready,and wait until the program will finished downloading files. A word PASS! will appear if the flashing successfully completes.
The phone will then reboot,you can check and confirm the newly downloaded firmware version by typing *#1234# and then do a full reset by typing this Code *2767*3855#
Special equipment for the ROM:
1. It's rooted.
2. Deodexed.
3. A2SD Darktremor
4. Ram script added
5. Custom bootanimation
6. Cool animations.
Not included
1. Google Maps. You can download it from Market.
2. YouTube app not included too. Download it from Market
Enjoy.
Guys.
Best regards,
AndroidNoOB
-----EDIT-----
For the kernel WIFI / 3G / 2G not working.
USE THE OTHER KERNEL.
I'm not responsable for the damage done to your phone!
-----FIX-----
Here's another KERNEL. From Phiexz.
Not tested by me.
SHOULD FIX THE WIFI / 3G / 2G PROBLEM
-----[You must be registered and logged in to see this link.]-----
Last edited by AndroidNoOB on Wed Feb 01, 2012 8:19 am; edited 5 times in total
Re: [ROM]SGG DT Based on KQ3 [2.3.4]
AndroidNoOB wrote:Hello, guys!
I just wanted to share a Rom with you. I've been using it for 1 week now. And it runs smooth
Want to [You must be registered and logged in to see this link.]?
Want to [You must be registered and logged in to see this link.]?
Video review
BenchMark test without OC:
[You must be registered and logged in to see this link.]
Installation.
FOR MULTI FILE Firmware Package( example: APBOOT,CODE,MODEM,CSC)
NOTE: Always do a fectory reset before and after flashing to avoid glitches.
1. Extract and Run Samsung S5660 Galaxy Gio ODIN 4.42 Downloader on your Desktop.
2. Open ODIN and Click OPS button and select and load: Gio_v1.0.ops
If you want to flash single file(.tar) click on Single package and locate the single .tar file in single package option . skip to step 7
3. Click BOOT button and select and load: APBOOT_S5660xxxxx_CL940762_REV03_user_low_true.tar.md5
4. Click PDA button and select and load: CODE_S5660xxxxx_CL940762_REV03_user_low_true.tar.md5
5. Click PHONE button and select: MODEM_S5660xxxxx_CL928654_REV03.tar.md5
6. Click CSC button and select: GT-S5660-MULTI-CSC-Oxxxxx.tar.md5
7. Turn the Samsung Galaxy Gio into Download mode by pressing ( Volume Down + OK + Power ) together.
8. Connect Cable phone to pc Make sure that the program detect the phone.
9. Click Start button if all set and ready,and wait until the program will finished downloading files. A word PASS! will appear if the flashing successfully completes.
The phone will then reboot,you can check and confirm the newly downloaded firmware version by typing *#1234# and then do a full reset by typing this Code *2767*3855#
Special equipment for the ROM:
1. It's rooted.
2. Deodexed.
3. A2SD Darktremor
4. Ram script added
5. Custom bootanimation
6. Cool animations.
Not included
1. Google Maps. You can download it from Market.
2. YouTube app not included too. Download it from Market
Enjoy.
Guys.
Best regards,
AndroidNoOB
What about gaming performance? btw nice rom
kaspar823- Posts : 1034
Join date : 2011-11-13
Age : 31
Location : Estonia
Re: [ROM]SGG DT Based on KQ3 [2.3.4]
Games run smooth tookaspar823 wrote:AndroidNoOB wrote:Hello, guys!
I just wanted to share a Rom with you. I've been using it for 1 week now. And it runs smooth
Want to [You must be registered and logged in to see this link.]?
Want to [You must be registered and logged in to see this link.]?
Video review
BenchMark test without OC:
[You must be registered and logged in to see this link.]
Installation.
FOR MULTI FILE Firmware Package( example: APBOOT,CODE,MODEM,CSC)
NOTE: Always do a fectory reset before and after flashing to avoid glitches.
1. Extract and Run Samsung S5660 Galaxy Gio ODIN 4.42 Downloader on your Desktop.
2. Open ODIN and Click OPS button and select and load: Gio_v1.0.ops
If you want to flash single file(.tar) click on Single package and locate the single .tar file in single package option . skip to step 7
3. Click BOOT button and select and load: APBOOT_S5660xxxxx_CL940762_REV03_user_low_true.tar.md5
4. Click PDA button and select and load: CODE_S5660xxxxx_CL940762_REV03_user_low_true.tar.md5
5. Click PHONE button and select: MODEM_S5660xxxxx_CL928654_REV03.tar.md5
6. Click CSC button and select: GT-S5660-MULTI-CSC-Oxxxxx.tar.md5
7. Turn the Samsung Galaxy Gio into Download mode by pressing ( Volume Down + OK + Power ) together.
8. Connect Cable phone to pc Make sure that the program detect the phone.
9. Click Start button if all set and ready,and wait until the program will finished downloading files. A word PASS! will appear if the flashing successfully completes.
The phone will then reboot,you can check and confirm the newly downloaded firmware version by typing *#1234# and then do a full reset by typing this Code *2767*3855#
Special equipment for the ROM:
1. It's rooted.
2. Deodexed.
3. A2SD Darktremor
4. Ram script added
5. Custom bootanimation
6. Cool animations.
Not included
1. Google Maps. You can download it from Market.
2. YouTube app not included too. Download it from Market
Enjoy.
Guys.
Best regards,
AndroidNoOB
What about gaming performance? btw nice rom
Re: [ROM]SGG DT Based on KQ3 [2.3.4]
shaimie wrote:how is the battery
Pretty good
kaspar823- Posts : 1034
Join date : 2011-11-13
Age : 31
Location : Estonia
Re: [ROM]SGG DT Based on KQ3 [2.3.4]
shaimie wrote:better then stock?
I think so
kaspar823- Posts : 1034
Join date : 2011-11-13
Age : 31
Location : Estonia
Re: [ROM]SGG DT Based on KQ3 [2.3.4]
First.shaimie wrote:G/3G internet dont work
Hold power button. Then select turn on mobile internet?
Or go to settings in Mobile Data
Re: [ROM]SGG DT Based on KQ3 [2.3.4]
Then why it works for me?shaimie wrote:tried it diddent work for me
Re: [ROM]SGG DT Based on KQ3 [2.3.4]
shaimie wrote:idk then my phone sucks
Did you use stock OPS? Did you wipe data and cache before and after flashing the ROM?
kaspar823- Posts : 1034
Join date : 2011-11-13
Age : 31
Location : Estonia
Re: [ROM]SGG DT Based on KQ3 [2.3.4]
I did it.kaspar823 wrote:shaimie wrote:idk then my phone sucks
Did you use stock OPS? Did you wipe data and cache before and after flashing the ROM?
But idk. If he did that
Re: [ROM]SGG DT Based on KQ3 [2.3.4]
Wifi and 3g not work me too..
The problem is not whit my phone,the problem is from kernel i think. Wifi /3g not work.
The problem is not whit my phone,the problem is from kernel i think. Wifi /3g not work.
weedor93- Posts : 297
Join date : 2011-10-09
Re: [ROM]SGG DT Based on KQ3 [2.3.4]
It looks the same as Stock ROM. ^^
wessyh0- Posts : 262
Join date : 2011-08-24
Location : Amsterdam,The Netherlands
Re: [ROM]SGG DT Based on KQ3 [2.3.4]
kaspar823 wrote:shaimie wrote:idk then my phone sucks
Did you use stock OPS? Did you wipe data and cache before and after flashing the ROM?
i only did wipe data/factory reset
Re: [ROM]SGG DT Based on KQ3 [2.3.4]
Reflash the ROM.shaimie wrote:kaspar823 wrote:shaimie wrote:idk then my phone sucks
Did you use stock OPS? Did you wipe data and cache before and after flashing the ROM?
i only did wipe data/factory reset
And use the other kernel. ^
Re: [ROM]SGG DT Based on KQ3 [2.3.4]
when i instal kernel its stuck a boot animation always en flashed it twice so i keep 2.3.3 works great 2.3.4 got reboots 2.3.5 too
Re: [ROM]SGG DT Based on KQ3 [2.3.4]
shaimie wrote:when i instal kernel its stuck a boot animation always en flashed it twice so i keep 2.3.3 works great 2.3.4 got reboots 2.3.5 too
I added a fix for the WIFI / 3G / 2G Problem, and for the Stuck at BOOTANIMATION too
Thanks to, Phiexz
Re: [ROM]SGG DT Based on KQ3 [2.3.4]
Can you show me step by step how to instal Phiexz kernel?AnDroidNoOB wrote:shaimie wrote:when i instal kernel its stuck a boot animation always en flashed it twice so i keep 2.3.3 works great 2.3.4 got reboots 2.3.5 too
I added a fix for the WIFI / 3G / 2G Problem, and for the Stuck at BOOTANIMATION too
Thanks to, Phiexz
neziniukas- Posts : 15
Join date : 2011-12-20
Re: [ROM]SGG DT Based on KQ3 [2.3.4]
neziniukas wrote:Can you show me step by step how to instal Phiexz kernel?AnDroidNoOB wrote:shaimie wrote:when i instal kernel its stuck a boot animation always en flashed it twice so i keep 2.3.3 works great 2.3.4 got reboots 2.3.5 too
I added a fix for the WIFI / 3G / 2G Problem, and for the Stuck at BOOTANIMATION too
Thanks to, Phiexz
1. Reboot to Recovery.
2. Must have CMWx5 for best results.
3. Do Nandroid Backup. Or Backup the ROM.
4. Press Install .zip from sd card.
5. Select the Kernel you've copied to your SD-CARD.
6. Click it.
7. Agree to the installation.
8. Reboot and enjoy
Re: [ROM]SGG DT Based on KQ3 [2.3.4]
Yeah, I just installed cwm5 and then Phiexz kernel and everything works smooth. Thanks again ;-D
neziniukas- Posts : 15
Join date : 2011-12-20
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum